Zhuzhou TGC Cemented Carbide Co.,Ltd.
Zhuzhou TGC Cemented Carbide Co.,Ltd. Specialized in production of all kinds of tungsten carbide rods
Add to Cart
K10F ground carbide rods for making cutting tools for Aluminium alloys
| ISO-Range | K10 |
| Chemical Data | |
| Co (%) | 6 |
| WC incl. Doping (%) | 94 |
| Physical Data | |
| Density (g/cm3) | 14.8 |
| Hardness | |
| HV 30 (N/mm2) | 1900 |
| HRA | 93.8 |
| Transverse Rupture Strength | |
| (N/mm2) | > 3900 |
| KIc* (Shetty) (MNm-3/2) | 9 |
| Metallographic Data | |
| Porosity | |
| ≤10 μm A ≤ 02 | |
| 10 -25 μm B 00 | |
| C 00 | |
| Microstructure | |
| Tungsten Carbide α | 0.6 μm |
| Diameter (mm) | Length (mm) | Diameter (mm) | Length (mm) | |||||
| D | Tolerance | Length | Tol. | D | Tolerance | Length | Tol. | |
| 1.00 | +0/-0.006 | 330 | 0/+0.5 | 10.50 | +0/-0.011 | 330 | 0/+0.5 | |
| 1.50 | 330 | 0/+0.5 | 11.00 | 330 | 0/+0.5 | |||
| 2.00 | 330 | 0/+0.5 | 11.50 | 330 | 0/+0.5 | |||
| 2.50 | 330 | 0/+0.5 | 12.00 | 330 | 0/+0.5 | |||
| 3.00 | 330 | 0/+0.5 | 12.50 | 330 | 0/+0.5 | |||
| 3.50 | 330 | 0/+0.5 | 13.00 | 330 | 0/+0.5 | |||
| 4.00 | 330 | 0/+0.5 | 13.50 | 330 | 0/+0.5 | |||
| 4.50 | +0/-0.008 | 330 | 0/+0.5 | 14.00 | 330 | 0/+0.5 | ||
| 5.00 | 330 | 0/+0.5 | 14.50 | 330 | 0/+0.5 | |||
| 5.50 | 330 | 0/+0.5 | 15.00 | 330 | 0/+0.5 | |||
| 6.00 | 330 | 0/+0.5 | 15.50 | 330 | 0/+0.5 | |||
| 6.50 | 330 | 0/+0.5 | 16.00 | 330 | 0/+0.5 | |||
| 7.00 | 330 | 0/+0.5 | 18.00 | 330 | 0/+0.5 | |||
| 7.50 | 330 | 0/+0.5 | 20.00 | 330 | 0/+0.5 | |||
| 8.00 | +0/-0.009 | 330 | 0/+0.5 | 22.00 | 330 | 0/+0.5 | ||
| 8.50 | 330 | 0/+0.5 | 24.00 | 330 | 0/+0.5 | |||
| 9.00 | 330 | 0/+0.5 | 25.00 | +0/-0.013 | 330 | 0/+0.5 | ||
| 9.50 | 330 | 0/+0.5 | 28.00 | 330 | 0/+0.5 | |||
| 10.00 | 330 | 0/+0.5 | 30.00 | 330 | 0/+0.5 | |||
| 32.00 | +0/-0.016 | 330 | 0/+0.5 | |||||
| General tolerance for the h6 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -6/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -8/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -9/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -11/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -13/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -16/0 | 30,1- 50,0 | 5,0 micron | |||||||
| General tolerance for the h5 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -4/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -5/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -6/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -8/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -9/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -11/0 | 30,1- 50,0 | 5,0 micron | |||||||