Zhuzhou TGC Cemented Carbide Co.,Ltd.
Zhuzhou TGC Cemented Carbide Co.,Ltd. Specialized in production of all kinds of tungsten carbide rods
Add to Cart
HSC machining tempered steel tungsten carbide rods with straight holes KIC 9.2
ISO K10-k20
Cobalt: 8.2%
Outer diameter 11mm +0.5
Inner diameter: 1.0mm ±0.15
Length: 120mm +0.5 mm
Surface roughness: Raw sintered Ra 6.3
Application: ultrafine carbide grade for HSC machining of tempered steels with a hardness of > 60 HRC and abrasive aluminum alloys
Recommended Carbide grade
| ISO CODE | U.S.CODE | Binder | Density | Hardness | Transverse | KIC | |
| g/cm3 | HV30 | HRA | Mpa | Mpa.m1/2 | |||
| K10-K20 | C-2 | 8.2 | 14.55 | 1930 | 93.7 | 4400 | 9.2 |
Regular size for one central hole carbide rods:
| Outer Diameter mm | Inner Diameter mm | Length mm | |||
| OD | Tol. | ID | Tol. | Length | Tol. |
| 2.50 | +0.2/+0.5 | 0.3 | ±0.1 | 330 | 0/+5.0 |
| 4.00 | +0.2/+0.6 | 1.0 | ±0.15 | 330 | 0/+5.0 |
| 5.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 5.00 | 1.5 | ±0.15 | 330 | 0/+5.0 | |
| 6.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 6.00 | 1.5 | ±0.15 | 330 | 0/+5.0 | |
| 8.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 8.00 | 1.5 | ±0.15 | 330 | 0/+5.0 | |
| 9.00 | +0.3/+0.7 | 1.0 | ±0.15 | 330 | 0/+5.0 |
| 10.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 10.00 | 2.0 | ±0.2 | 330 | 0/+5.0 | |
| 11.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 12.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 12.00 | 2.0 | ±0.2 | 330 | 0/+5.0 | |
| 14.00 | 2.0 | ±0.2 | 330 | 0/+5.0 | |
| 16.00 | +0.4/+0.8 | 2.0 | ±0.2 | 330 | 0/+5.0 |
| 16.00 | 3.0 | ±0.25 | 330 | 0/+5.0 | |
| 18.00 | 3.0 | ±0.25 | 330 | 0/+5.0 | |
| 20.00 | 3.0 | ±0.25 | 330 | 0/+5.0 | |
| 22.00 | 3 | ±0.25 | 330 | 0/+5.0 | |
| 24.00 | 4 | ±0.30 | 330 | 0/+5.0 | |
| 25.00 | 5 | ±0.35 | 330 | 0/+5.0 | |
| Outer Diameter mm | TK mm | Inner Diameter mm | Deviation of holes position≤(mm) a | Length mm | ||||
| OD | Tol. | TK | Tol. | ID | Tol. | Length | Tol. | |
| 4.30 | +0/+0.3 | 1.8 | -0.4/0 | 0.800 | ±0.1 | 0.15 | 330 | 0/+5.0 |
| 5.30 | 2.0 | -0.4/0 | 0.800 | ±0.1 | 0.20 | 330 | 0/+5.0 | |
| 6.30 | 3.0 | -0.5/0 | 1.000 | ±0.15 | 0.20 | 330 | 0/+5.0 | |
| 7.30 | 3.5 | -0.5/0 | 1.000 | ±0.15 | 0.20 | 330 | 0/+5.0 | |
| 8.30 | 4.0 | -0.6/0 | 1.000 | ±0.15 | 0.20 | 330 | 0/+5.0 | |
| 9.30 | 4.0 | -0.6/0 | 1.400 | ±0.15 | 0.20 | 330 | 0/+5.0 | |
| 10.30 | 5.0 | -0.6/0 | 1.400 | ±0.15 | 0.20 | 330 | 0/+5.0 | |
| 11.30 | +0/+0.4 | 5.0 | -0.6/0 | 1.400 | ±0.15 | 0.28 | 330 | 0/+5.0 |
| 12.30 | 6.0 | -0.6/0 | 1.750 | ±0.15 | 0.30 | 330 | 0/+5.0 | |
| 13.30 | 6.0 | -0.6/0 | 1.750 | ±0.15 | 0.34 | 330 | 0/+5.0 | |
| 14.30 | 7.0 | -0.6/0 | 1.750 | ±0.15 | 0.37 | 330 | 0/+5.0 | |
| 15.30 | 8.0 | -0.6/0 | 2.000 | ±0.2 | 0.37 | 330 | 0/+5.0 | |
| 16.30 | 8.0 | -0.6/0 | 2.000 | ±0.2 | 0.40 | 330 | 0/+5.0 | |
| 17.30 | +0/+0.6 | 9.0 | -0.6/0 | 2.000 | ±0.2 | 0.47 | 330 | 0/+5.0 |
| 18.30 | 9.0 | -0.6/0 | 2.000 | ±0.2 | 0.50 | 330 | 0/+5.0 | |
| 19.30 | 9.0 | -0.6/0 | 2.000 | ±0.2 | 0.50 | 330 | 0/+5.0 | |
| 20.30 | 10.0 | -0.8/0 | 2.500 | ±0.25 | 0.50 | 330 | 0/+5.0 | |
| General tolerance for the h6 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -6/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -8/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -9/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -11/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -13/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -16/0 | 30,1- 50,0 | 5,0 micron | |||||||
Our tungsten carbide rods: