Zhuzhou TGC Cemented Carbide Co.,Ltd.
Zhuzhou TGC Cemented Carbide Co.,Ltd. Specialized in production of all kinds of tungsten carbide rods
Add to Cart
Cermet Tungsten Carbide Rods with One straight Holes K05-K10 for machining steel
ISO K05-K10
Cobalt: 14%
Outer diameter 9mm +0.3
Inner diameter: 1.0 +/-0.15
Length: 330mm +3mm
Surface roughness: Raw sintered Ra 6.3 or as required
Application: particularly for the finish machining of steel. Thanks to its high oxidation resistance and low tendency to stick it is particularly suitable for the production of uncoated reamers.
Grade datasheet:
| |||||||||||||||||||||
For more grades details, please kindly check the general datasheet in the following details:
Regular size for one central hole carbide rods:
| Outer Diameter mm | Inner Diameter mm | Length mm | |||
| OD | Tol. | ID | Tol. | Length | Tol. |
| 2.50 | +0.2/+0.5 | 0.3 | ±0.1 | 330 | 0/+5.0 |
| 4.00 | +0.2/+0.6 | 1.0 | ±0.15 | 330 | 0/+5.0 |
| 5.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 5.00 | 1.5 | ±0.15 | 330 | 0/+5.0 | |
| 6.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 6.00 | 1.5 | ±0.15 | 330 | 0/+5.0 | |
| 8.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 8.00 | 1.5 | ±0.15 | 330 | 0/+5.0 | |
| 9.00 | +0.3/+0.7 | 1.0 | ±0.15 | 330 | 0/+5.0 |
| 10.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 10.00 | 2.0 | ±0.2 | 330 | 0/+5.0 | |
| 11.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 12.00 | 1.0 | ±0.15 | 330 | 0/+5.0 | |
| 12.00 | 2.0 | ±0.2 | 330 | 0/+5.0 | |
| 14.00 | 2.0 | ±0.2 | 330 | 0/+5.0 | |
| 16.00 | +0.4/+0.8 | 2.0 | ±0.2 | 330 | 0/+5.0 |
| 16.00 | 3.0 | ±0.25 | 330 | 0/+5.0 | |
| 18.00 | 3.0 | ±0.25 | 330 | 0/+5.0 | |
| 20.00 | 3.0 | ±0.25 | 330 | 0/+5.0 | |
| 22.00 | 3 | ±0.25 | 330 | 0/+5.0 | |
| 24.00 | 4 | ±0.30 | 330 | 0/+5.0 | |
| 25.00 | 5 | ±0.35 | 330 | 0/+5.0 | |
| Outer Diameter mm | TK mm | Inner Diameter mm | Deviation of holes position≤(mm) a | Length mm | ||||
| OD | Tol. | TK | Tol. | ID | Tol. | Length | Tol. | |
| 4.30 | +0/+0.3 | 1.8 | -0.4/0 | 0.800 | ±0.1 | 0.15 | 330 | 0/+5.0 |
| 5.30 | 2.0 | -0.4/0 | 0.800 | ±0.1 | 0.20 | 330 | 0/+5.0 | |
| 6.30 | 3.0 | -0.5/0 | 1.000 | ±0.15 | 0.20 | 330 | 0/+5.0 | |
| 7.30 | 3.5 | -0.5/0 | 1.000 | ±0.15 | 0.20 | 330 | 0/+5.0 | |
| 8.30 | 4.0 | -0.6/0 | 1.000 | ±0.15 | 0.20 | 330 | 0/+5.0 | |
| 9.30 | 4.0 | -0.6/0 | 1.400 | ±0.15 | 0.20 | 330 | 0/+5.0 | |
| 10.30 | 5.0 | -0.6/0 | 1.400 | ±0.15 | 0.20 | 330 | 0/+5.0 | |
| 11.30 | +0/+0.4 | 5.0 | -0.6/0 | 1.400 | ±0.15 | 0.28 | 330 | 0/+5.0 |
| 12.30 | 6.0 | -0.6/0 | 1.750 | ±0.15 | 0.30 | 330 | 0/+5.0 | |
| 13.30 | 6.0 | -0.6/0 | 1.750 | ±0.15 | 0.34 | 330 | 0/+5.0 | |
| 14.30 | 7.0 | -0.6/0 | 1.750 | ±0.15 | 0.37 | 330 | 0/+5.0 | |
| 15.30 | 8.0 | -0.6/0 | 2.000 | ±0.2 | 0.37 | 330 | 0/+5.0 | |
| 16.30 | 8.0 | -0.6/0 | 2.000 | ±0.2 | 0.40 | 330 | 0/+5.0 | |
| 17.30 | +0/+0.6 | 9.0 | -0.6/0 | 2.000 | ±0.2 | 0.47 | 330 | 0/+5.0 |
| 18.30 | 9.0 | -0.6/0 | 2.000 | ±0.2 | 0.50 | 330 | 0/+5.0 | |
| 19.30 | 9.0 | -0.6/0 | 2.000 | ±0.2 | 0.50 | 330 | 0/+5.0 | |
| 20.30 | 10.0 | -0.8/0 | 2.500 | ±0.25 | 0.50 | 330 | 0/+5.0 | |
| General tolerance for the h6 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -6/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -8/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -9/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -11/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -13/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -16/0 | 30,1- 50,0 | 5,0 micron | |||||||
Our tungsten carbide rods: