Zhuzhou TGC Cemented Carbide Co.,Ltd.
Zhuzhou TGC Cemented Carbide Co.,Ltd. Specialized in production of all kinds of tungsten carbide rods
Add to Cart
Carbide core rods finished ground carbide rods for wear parts
Tungsten Carbide details:
Grade YG8
Density 14.6
T.R.S 2400
Hardness HV30 1400
Recommendation: Used for manufacturing carbide core rods and wear parts
Dimension:
Outer Diameter: 3.175mm
Tolerance of OD -0.007
Length: 38.1mm
Tolerance of Length:+0/+0.5
Roughness: Ra0.02 polished
Chamfer No chamfer, cut-to-length
| Diameter mm | Length | ||
| D | Tolerance | L | Tol. |
| 3.25 | 0/+0.05 | 38.7 | ± 0.20 |
| 3.25 | 0/+0.05 | 38.5 | ± 0.20 |
| 3.50 | 0/+0.05 | 38.5 | ± 0.20 |
| 4.00 | 0/+0.05 | 38.5 | ± 0.20 |
| 4.50 | 0/+0.05 | 38.5 | ± 0.20 |
| 5.00 | 0/+0.05 | 38.5 | ± 0.20 |
| 5.50 | 0/+0.05 | 38.5 | ± 0.20 |
| 6.00 | 0/+0.05 | 38.5 | ± 0.20 |
| 6.50 | 0/+0.05 | 38.5 | ± 0.20 |
| 3.50 | +0.2/+0.5 | 12.8 | ± 0.10 |
| 4.00 | +0.2/+0.5 | 12.8 | ± 0.10 |
| 4.50 | +0.2/+0.5 | 12.8 | ± 0.10 |
| 5.00 | +0.2/+0.5 | 12.8 | ± 0.10 |
| 5.50 | +0.2/+0.5 | 12.8 | ± 0.10 |
| 6.00 | +0.2/+0.5 | 12.8 | ± 0.10 |
| 6.50 | +0.2/+0.5 | 12.8 | ± 0.10 |
| 6.85 | +0.2/+0.5 | 12.8 | ± 0.10 |
| ISO-Range | Co (%) | WC incl. Doping (%) | Density (g/cm3) | HV 30 (N/mm2) | HRA | T.R.S | KIc* (Shetty) (MNm-3/2) | Application |
| K10 | 6 | 94 | 14.8 | 1900 | 93.8 | > 3900 | 9 | Unalloyed and hardened steels Non-ferrous metals Aluminium alloys Cast iron Composites (CFRP and GFRP) |
| K10 - K20 | 8 | 92 | 14.6 | 1710 | 92.5 | > 4000 | 9.5 | Unalloyed and hardened steels Non-ferrous metals Non-ferrous metals Plastics |
| K20 - K30 | 9 | 91 | 14.3 | 1680 | 92.2 | > 3900 | 9 | High hardness materials Aluminium alloys Cast iron Graphite |
| K30 - K40 | 10 | 90 | 14.5 | 1610 | 91.9 | > 4200 | 10.5 | Steels Corrosion and heat resistant steels Stainless steels Non ferrous metals Nickel based alloys Aluminium alloys |
| K40 - K50 | 12 | 88 | 14.1 | 1680 | 92.3 | > 4400 | 10 | Steels Corrosion and heat resistant steels Stainless steels Non ferrous metals Titanium alloys |
| K40 - K50 | 13 | 87 | 13.9 | 1700 | 92.4 | > 4000 | 9.5 | Corrosion and heat resistant steels Non ferrous metals Nickel based alloys Titanium alloys |
| General tolerance for the h6 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -6/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -8/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -9/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -11/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -13/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -16/0 | 30,1- 50,0 | 5,0 micron | |||||||
| General tolerance for the h5 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -4/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -5/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -6/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -8/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -9/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -11/0 | 30,1- 50,0 | 5,0 micron | |||||||