One straight coolant hole solid carbide rods with 45°chamfer
Specification: Ø3×50mm with straight hole Ø0.8mm
Type: wear rods
Application: wear rods such as shaft pins or cutting blanks.
Cobalt: 10%
Hardness: HRA 91.9
TRS 4200
Density: 14.45
Grain size: sub-fine grain size
Our advantage:
- For raw material:
- Constantly excellent WC powder produced by our own factory.
- Spray drying tower and HIP sintering furnace
- Cryogenic treatment to remove the internal stress
- For grinding:
- General h6 rods and h5 or h4 as required
- Straightness 0.01-0.05
- Circularity 0.01-0.05
- General Roughness Ra 0.4, and Ra 0.2 or Ra 0.05 as required.
What we can provide:
- Unground/Finished ground Solid carbide rods
- Cemented carbide rods with straight coolant holes
- Cemented carbide rods with helical coolant holes
- Cut-to-length rods
- End mills blank with 3/4/5 holes
