Zhuzhou TGC Cemented Carbide Co.,Ltd.
Zhuzhou TGC Cemented Carbide Co.,Ltd. Specialized in production of all kinds of tungsten carbide rods
Add to Cart
BSM-6 Cone Tungsten Carbide Burrs Blank For Brass Aluminum Machining
General specifications:
Diameter: 5/8"
Length: 1-1/8"
Carbide burrs type: BSM-6 Cone burrs
Carbide grade datasheet:
ISO K10
Carbide grade: 6% Cobalt,
hardness HRA 91
T.R.S 2000
Application: Brass/Aluminum
BSM-6 tungsten carbide burrs, the diameter from 1/4" to 5/8" and the length from 5/8" to 1- 1/8". Carbide grade YG6 (6% cobalt) is suitable for machining brass/Aluminum.
| DESIGNATION | NOMINAL | ACTUAL | NOMINAL | ACTUAL | C Degrees Ref. | ||
| BSM-1 | 1/4 | 0.265±0.005 | 5/8 | 0.635±0.010 | 0.065±0.005 | 22 | 0.514 |
| BSM-4 | 3/8 | 0.390±0.005 | 3/4 | 0.760±0.010 | 0.073±0.005 | 28 | 0.636 |
| BSM-5 | 1/2 | 0.515±0.005 | 1 | 1 .010±0.010 | 0.073±0.005 | 28 | 0.886 |
| BSM-6 | 5/8 | 0.640±0.005 | 1 -1/8 | 1.141±0.015 | 0.080±0.005 | 31 | 1.010 |
Cobalt 6%
Hardness 90-91 HRA
Density 14.85-14.95 g/cm3
Grain size 1.2-3.0μm
Tungsten carbide burrs can be used with both electrically-powered and pneumatically-powered hand-held tools to cut the most diverse types of material, such as aluminum, brass, titanium alloys, cast iron, copper, zinc alloys, bronze, nickel, various plastics, alloy steels, etc. They can be used on a wide range of pneumatic, electric and flexible drive tools.
Description of our carbide burrs