K20-K40 Tungsten carbide tips for engraving tools for machining metals
Specifications:
Diameter: 1.6mm
Length: 80mm +0.5
Angle: 30°
Binder 10.3%
Hardness HRA 92.3
Density 14.30
T.R.S 4200
Carbide pin for engraving application.
Grade Recommended Application: Suitable for cutting stainless steel, heat resistant alloy, and cast iron..
Regular Cemented carbide pins
| OD(+-0.001)mm | Total L(0~+0.5) | Tips
Angle(°) | Tips L(mm) | Hardness
HRA | Applications |
| 0.5 | 10~330 | 30,45,60,90 | 3,4,5 | 88-92 | Die punching needle glass flaring needle |
| 1 | 10~330 | 30,45,60,90 | 3,4,5 | 88-92 | Die punching needle glass flaring needle |
| 2 | 10~330 | 30,45,60,90 | 3,4,5 | 88-92 | Die punching needle glass flaring needle |
| 3 | 10~330 | 30,45,60,90 | 3,4,5 | 88-92 | Die punching needle glass flaring needle |
| 4 | 10~330 | 30,45,60,90 | 3,4,5 | 88-92 | Die punching needle glass flaring needle |
| 5 | 10~330 | 30,45,60,90 | 3,4,5 | 88-92 | Die punching needle glass flaring needle |
| 6 | 10~330 | 30,45,60,90 | 3,4,5 | 88-92 | Die punching needle glass flaring needle |
| 7 | 10~330 | 30,45,60,90 | 3,4,5 | 88-92 | Die punching needle glass flaring needle |
| 8 | 10~330 | 30,45,60,90 | 3,4,5 | 88-92 | Die punching needle glass flaring needle |
| 9 | 10~330 | 30,45,60,90 | 3,4,5 | 88-92 | Die punching needle glass flaring needle |
| 10 | 10~330 | 30,45,60,90 | 3,4,5 | 88-92 | Die punching needle glass flaring needle |
Our carbide rods
- 100% virgin material, no recycled material
- Spray drying tower and HIP sintering furnace
- Constant excellent quality
- Large stock for all sizes, the regular products can be shipped in 3 days, and the special rods can be ground in one week.
- 100% inspected before delivery. The inspection including raw material and dimension report will be sent to you before delivery
- Excellent grinding quality, Straightless, and circularity could be 0.05 or 0.02.
Our regular products
Carbide grades
What we can provide
