Ultra Fine Grain Size K10 Tungsten Carbide Rods Fixed Length 120mm
Advantages of OUQI tungsten carbide rods with fixed length(cut-to-length):
- Customized length according to customer's requirements
- Polished rods could be Ra 0.02
- High hardness HRA 93.5 with ultra-fine grain size
- Straightness can be 0.01-0.02
| General tolerance for the h6 finished ground solid carbide rods |
| Diameter | Tolerance μm | | Length | Tolerance | | Straightness | Tolerance | | Circularity | Tolerances |
| ＜3.0 | -6/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron |
| 3.0-6.0 | -8/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron |
| 6.0-1.0 | -9/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron |
| 10.0-18.0 | -11/0 | | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron |
| 18.0-30.0 | -13/0 | | 18,1- 30,0 | 4,0 micron |
| 30.0-50.0 | -16/0 | 30,1- 50,0 | 5,0 micron |
Grades for tungsten carbide rods:
| Grade | ISO Code | Grain size
μm | Cobalt % | Density
g/cm3 | Hardness | T.R.S |
| | HV30 | HRA | N/mm2 | KPSI |
| YF06 | K05‐K10 | 0.5 | 6.0 | 14.90 | 1850 | 93.5 | 3800 | 553.9 |
| YL10A | K10‐K20 | 0.8 | 8.0 | 14.65 | 1780 | 92.8 | 4200 | 609.5 |
| YL10.2 | K20‐K30 | 0.8 | 10.0 | 14.42 | 1600 | 91.5 | 4000 | 580 |
| XF30 | K30‐K40 | 0.6 | 12.0 | 14.10 | 1700 | 92.5 | 4000 | 580 |
Recommended Application
| Grade | Application |
| YF06 | Suitable for machining composite materials, such as aluminum‐magnesium alloys, plastics, reinforced plastics, carbon, fiber, iron‐based alloys, etc. It is recommended for making big PCB drills of ф3.2‐6.3mm, micro drills of ф0.8‐3.2mm, micro-milling tools and reamers, etc. |
| YL10A | It is suitable for machining cast iron, aluminum alloys, etc. also for machining common steels.
It is recommended for the drilling of cast iron and aluminum alloys. |
| YL10.2 | It is suitable for machining common steel, cast iron, stainless steel, heat‐resistant steel, nickel-based alloys, titanium alloys, etc. It is recommended for making conventional tools, such as twist drills, end drills, screw taps, etc. |
| XF30 | It is suitable for machining titanium alloy, heat‐resistant alloys, stainless steel, hardened steel, grey cast iron, glass‐fiber Reinforced plastics, composite materials, etc. It is recommended to make drills and milling tools, etc. |
Solid finished ground carbide rods are usually used for making endmills, and drills. Ouqi can provide precision ground rods in which the circularity and straightness could be 0.02mm and surface roughness can be Ra 0.02. With advanced equipment, the capacity could be 10,000kgs per month for the finished ground rods.
What we can do
