Zhuzhou TGC Cemented Carbide Co.,Ltd.
Zhuzhou TGC Cemented Carbide Co.,Ltd. Specialized in production of all kinds of tungsten carbide rods
Add to Cart
0.377 in diameter tungsten carbide Two Straight coolant hole rods
Specification:
OD 0.377 inch
Inner diameter: 1mm×2pcs
Length 330mm or as required.
Type: Two Straight hole rods.
Application:
With Coolant holes for making cutting tools, such as endmills, drills, and reamers.
It is suitable for machining common steel, cast iron, stainless steel, heat‐resistant steel, nickel-based alloys, titanium alloys, etc. It is recommended for making conventional tools, such as twist drills, end drills, screw taps, etc.
Tungsten carbide, sometimes called carbide, is harder than Corrosion-Resistant Tungsten with excellent wear resistance. Use it to machine long-lasting tools, such as endmills and inserts.
Rods with a coolant hole let coolant flow into tools that need it, saving you the effort of drilling a hole yourself.
| Outer Diameter mm | TK mm | Inner Diameter mm | Deviation of holes position≤(mm) a | Length mm | |||
| OD | TK | Tol. | ID | Tol. | Length | Tol. | |
| 4.30 | 1.8 | -0.4/0 | 0.800 | ±0.1 | 0.15 | 330 | 0/+5.0 |
| 5.30 | 2.0 | -0.4/0 | 0.800 | ±0.1 | 0.20 | 330 | 0/+5.0 |
| 6.30 | 3.0 | -0.5/0 | 1.000 | ±0.15 | 0.20 | 330 | 0/+5.0 |
| 7.30 | 3.5 | -0.5/0 | 1.000 | ±0.15 | 0.20 | 330 | 0/+5.0 |
| 8.30 | 4.0 | -0.6/0 | 1.000 | ±0.15 | 0.20 | 330 | 0/+5.0 |
| 9.30 | 4.0 | -0.6/0 | 1.400 | ±0.15 | 0.20 | 330 | 0/+5.0 |
| 10.30 | 5.0 | -0.6/0 | 1.400 | ±0.15 | 0.20 | 330 | 0/+5.0 |
| 11.30 | 5.0 | -0.6/0 | 1.400 | ±0.15 | 0.28 | 330 | 0/+5.0 |
| 12.30 | 6.0 | -0.6/0 | 1.750 | ±0.15 | 0.30 | 330 | 0/+5.0 |
| 13.30 | 6.0 | -0.6/0 | 1.750 | ±0.15 | 0.34 | 330 | 0/+5.0 |
| 14.30 | 7.0 | -0.6/0 | 1.750 | ±0.15 | 0.37 | 330 | 0/+5.0 |
| 15.30 | 8.0 | -0.6/0 | 2.000 | ±0.2 | 0.37 | 330 | 0/+5.0 |
| 16.30 | 8.0 | -0.6/0 | 2.000 | ±0.2 | 0.40 | 330 | 0/+5.0 |
| 17.30 | 9.0 | -0.6/0 | 2.000 | ±0.2 | 0.47 | 330 | 0/+5.0 |
| 18.30 | 9.0 | -0.6/0 | 2.000 | ±0.2 | 0.50 | 330 | 0/+5.0 |
| 19.30 | 9.0 | -0.6/0 | 2.000 | ±0.2 | 0.50 | 330 | 0/+5.0 |
| 20.30 | 10.0 | -0.8/0 | 2.500 | ±0.25 | 0.50 | 330 | 0/+5.0 |
Grades for tungsten carbide rods:
| Classification | K20-K40 | K15-K20 | K20-K40 | K20-K30 | K20 | K20 | K10 | K05-K10 |
| Co % | 10 | 6 | 10 | 12 | 8 | 8 | 7 | 9 |
| WC incl. doping | 90 | 94 | 90 | 88 | 92 | 92 | 93 | 91 |
| Density g/ cm3 | 14.5 | 14.95 | 14.45 | 14.05 | 14.55 | 14.6 | 14.7 | 14.35 |
| Hardness HV30 | 1580 | 1620 | 1620 | 1690 | 1720 | 1790 | 1850 | 1920 |
| Fracture toughness | 11 | 9.9 | 10.6 | 10.4 | 9.5 | 9.6 | 9.6 | 9.3 |
| Transverse rupture strength | 4100 | 3200 | 4100 | 4200 | 3800 | 3700 | 3500 | 3800 |
| Average grain size | 0.7 | 1.2 | 0.6 | 0.5 | 0.7 | 0.6 | 0.7 | 0.2 |
| General tolerance for the h5 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -4/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -5/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -6/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -8/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -9/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -11/0 | 30,1- 50,0 | 5,0 micron | |||||||
Our advantage: