Zhuzhou TGC Cemented Carbide Co.,Ltd.
Zhuzhou TGC Cemented Carbide Co.,Ltd. Specialized in production of all kinds of tungsten carbide rods
Add to Cart
OD21.5mm Ultrafine grain size Unground carbide rod for Titanium alloy
| ISO Grade | Grain | Cobalt | Density | Hardness | T.R.S | Application |
| um | % | g/cm3 | HRA | N/mm2 | ||
| K30-K40 | 0.6 | 10-12 | 14.1-14.2 | 92-92.5 | 3800-4000 | Ultrafine grain size, high cobalt, good hardness and toughness, used for making endmill and reamer, especially suitable for cutting steel, aluminum alloy, and titanium. |
Specification:
Unground Diameter: 21.5mm +0.5
Length 330mm +5mm or as required
ISO grade K30/K40
Grain size: 0.6μm
Density: 14.1-14.2
Applications:
Ultrafine grain size, high cobalt, good hardness and toughness, used for making endmill and reamer, especially suitable for cutting steel, aluminum alloy, and titanium.
| General tolerance for the raw sintered solid carbide rods | |||||||
| Diameter | Tolerance | Length | Tolerance | Straightness | Tolerance | ||
| 0,5- 3,5 | +0,25/+0,35 | ＜100.0 | +0.5/+1.0 | 0,6-4 | 0,10 | ||
| 4,0- 6,0 | +0,25/+0,40 | 100.0-165.0 | +1.0/+2.5 | 4,5-8 | 0,12 | ||
| 6,5-12,0 | +0,30/+0,45 | 165.0-335.0 | +1.0/+6.0 | 8,5-12,0 | 0,15 | ||
| 12,5-16,0 | +0,35/+0,50 | 12,5 - 20 | 0,20 | ||||
| 16,5- 22,0 | +0,40/+0,55 | ≥20,5 | 0,24 | ||||
| 22,5-45,0 | +0,45/+0,60 | ||||||
Description:
| Diameter mm | Length mm | Diameter mm | Length mm | |||||
| D | Tolerance | Length | Tol. | D | Tolerance | Length | Tol. | |
| 1.16 | -0/+0.15 | 330 | 0/+0.5 | 16.20 | -0/+0.45 | 330 | 0/+0.5 | |
| 1.65 | 330 | 0/+0.5 | 17.20 | 330 | 0/+0.5 | |||
| 1.80 | 330 | 0/+0.5 | 18.20 | 330 | 0/+0.5 | |||
| 2.20 | -0/+0.20 | 330 | 0/+0.5 | 19.20 | 330 | 0/+0.5 | ||
| 2.70 | 330 | 0/+0.5 | 20.20 | 330 | 0/+0.5 | |||
| 3.25 | 330 | 0/+0.5 | 21.20 | -0/+0.55 | 330 | 0/+0.5 | ||
| 3.70 | 330 | 0/+0.5 | 22.20 | 330 | 0/+0.5 | |||
| 4.20 | 330 | 0/+0.5 | 23.20 | 330 | 0/+0.5 | |||
| 4.70 | 330 | 0/+0.5 | 24.2 | 330 | 0/+0.5 | |||
| 5.20 | -0/+0.25 | 330 | 0/+0.5 | 25.2 | -0/+0.65 | 330 | 0/+0.5 | |
| 5.70 | 330 | 0/+0.5 | 26.2 | 330 | 0/+0.5 | |||
| 6.20 | 330 | 0/+0.5 | 28.2 | 330 | 0/+0.5 | |||
| 6.70 | 330 | 0/+0.5 | 30.2 | 330 | 0/+0.5 | |||
| 7.20 | -0/+0.35 | 330 | 0/+0.5 | 32.2 | 330 | 0/+0.5 | ||
| 7.70 | 330 | 0/+0.5 | ||||||
| 8.20 | 330 | 0/+0.5 | ||||||
| 8.70 | 330 | 0/+0.5 | ||||||
| 9.20 | 330 | 0/+0.5 | ||||||
| 9.70 | 330 | 0/+0.5 | ||||||
| 10.20 | 330 | 0/+0.5 | ||||||
| 10.70 | 330 | 0/+0.5 | ||||||
| 11.20 | 330 | 0/+0.5 | ||||||
| 11.70 | 330 | 0/+0.5 | ||||||
| 12.20 | 330 | 0/+0.5 | ||||||
| 12.70 | 330 | 0/+0.5 | ||||||
| 13.20 | 330 | 0/+0.5 | ||||||
| 13.70 | 330 | 0/+0.5 | ||||||
| 14.20 | 330 | 0/+0.5 | ||||||
| 14.70 | 330 | 0/+0.5 | ||||||
| 15.20 | 330 | 0/+0.5 | ||||||
| 15.70 | 330 | 0/+0.5 | ||||||
Grades for tungsten carbide rods: